WGJ-HP SMART
characteristics
Heater of the heat pump WGJ-HP is equipped with a helical coil enabling for the connection of other power sources like low temperature hot water boiler or solar collectors from the heating medium based on glycol.
Advantages of the heat pump:
- high efficiency - COP 4,1,
- Polish product,
- intelligent automation TECH,
- very quiet running,
- unique evaporator,
- high quality compressor,
- high quality reservoir,
- titatnium and cobalt enamel PEMCO,
- access to spare parts,
- Door To Door service.
Available models:
Catalog number | Model | EAN |
072-30-101 | WGJ-HP 300 smart | 5903538247020 |
072-20-101 | WGJ-HP 200 smart | 5903538247037 |
technical information
Parameter | Unit | WGJ-HP 200 | WGJ-HP 300 | |
Refrigerant | R134a | |||
Mass of refrigerant | kg | 1,56 | ||
Performance characteristics | ||||
Tank capacity | dm³ | 219 | 290 | |
The amount of water heated by an electric heater | dm³ | 165 | 130 | |
Operating temperature range using electric immersion heater | °C | 5 °C - 70 °C | ||
Power electric immersion heater | W | 2000 | ||
Input power - the fan, compressor, driver (nominal) | W | 550 - 650 | ||
Input power(top nominal) | W | 3000 | ||
Air temperature range for operation of the pump | °C | 5 °C - 35°C | ||
Range of temperature control water in the tank | °C | 30 °C - 70 °C | ||
Operating temperature range using a pump | °C | 30 °C - 55 °C | ||
Diameter connection | Cold water | inch | 1" | |
Diameter connection | Hot water | inch | 1" | |
Power | 230V / 50Hz | |||
Fuse protection on differential | A | 16 | ||
Weight of the device | kg | 205 | 214 | |
Operating pressure | bar | 6 | ||
Noise level | dB | 54 | ||
Internal coil power (1,4m²) | kW | 30 | ||
External power coil (0,71m²) | kW | 14 | ||
Efficiency | ||||
Efficiency ratio for the outdoor temperature. +15ºC ** | COP | 4,15 | 4,1 | |
Efficiency ratio for the outdoor temperature +7ºC | COP | 3,5 | 3,5 | |
Thermal efficiency (heat pump)* | dm³ | 330 | 430 | |
Heat output (electric heater) * | dm³ | 260 | 200 | |
Airflow (no load -1 speed.) | m³/h | 315 | ||
The time of heating using the heat pump ** | h | 4 | 5 | |
Heating time using electric immersion heater (for 130dm³) | h | 3 | 2,5 |
* Continuous output of water temperature. + 40 ° C (temp. 55 ° C water in the tank)
** Water heated in the range of 15 ÷ 45 ° C, temperature. The intake air: 15 ° C
Air suction | WEP | Ø 155 mm |
Air exhaust | WYP | Ø 155 mm |
Heating water supply | WE | 1" |
Heating water return | WY | 1" |
Domestic hot water | CW | 1" |
Domestic cold water | ZW | 1" |
Muff temperature sensor | CT | 3/8" |
Circulation | RC | ¾" |
Draining | ZS | 1" |
Connector magnesium anode | AN | 2" |
Connector heater | MG | 1 ½" |