WGJ-S PP
Exchangers are designed to heat and store hot water for the needs of flats, single- and multi-family homes and other objects equipped with a low-temperature hot water boilers of any type.
The tank is covered inside with a layer of special high temperature ceramic enamel.
Available models:
Catalog number | Model | EAN |
066-25-106/PP | WGJ-S PP 250 | 5903538245071 |
066-30-106/PP | WGJ-S PP 300 | 5903538245088 |
066-40-106/PP | WGJ-S PP 400 | 5903538245095 |
Type | Unit | WGJ-S PP 250 | WGJ-S PP 300 | WGJ-S PP 400 |
Tank capacity | dm³ | 252 | 307 | 420 |
Heat exchanger area | m² | 1,1 | 1,4 | 1,6 |
The capacity of the coil | dm³ | 6,4 | 8,0 | 9,5 |
Efficiency hot water 80/10/45°C 70/10/45°C 60/10/45°C | l/h |
629 526 378 |
826 727 506 |
948 826 600 |
Heating power 80/10/45°C 70/10/45°C 60/10/45°C | kW |
25,6 21,4 15,4 |
33,6 29,6 20,6 |
38,6 33,6 24,4 |
Efficiency hot water 80/10/60°C 70/10/60°C | l/h |
354 227 |
450 279 |
523 330 |
Heating power 80/10/60°C 70/10/60°C | kW |
20,6 13,2 |
26,2 16,2 |
30,4 19,2 |
Standing loss** | W | 61 | 73 | 59 |
ErP Efficiency Class** | B | C | B | |
Heating water flow in the coil | m³/h | 1,8 | 2,2 | 2,6 |
Loss of pressure | mbar | 40 | 70 | 110 |
Operating parameters of the tank | Maximum operating pressure and temperature pr = 0,6 MPa tr = 80°C | |||
The parameters of the heating medium | Maximum operating pressure and temperature pr = 0,6 MPa tr = 100°C | |||
Type of tank | steel covered inside with ceramic enamel | |||
Type of the outer housing | plastic or skay | |||
Thermal isolation | 60 mm of polyurethane foam or 70 mm polystyrene foam | 100 mm polystyrene foam | ||
Weight heater | kg | 80 | 100 | 140 |
* in accordance with applicable since 26 September 2015. EU Commission Regulation No. 812/2013
Type | Unit | WGJ-S 250 PP | WGJ-S 300 PP | WGJ-S 400 PP | ||
Capacity | dm³ | 252 | 307 | 420 | ||
Height | isolation PS | H | mm | 1600 | 1900 | 1850 |
isolation PUR | 1580 | 1880 | - | |||
Max. altitude at an inclination | isolation PS | H* | mm | 1730 | 2010 | 2020 |
isolation PUR | 1700 | 1985 | - | |||
Diameter | isolation PS | D | mm | 650 | 650 | 810 |
isolation PUR | 630 | 630 | - | |||
Cold water | ZW | ¾" | ¾" | 1 ¼" | ||
A | mm | 250 | 250 | 330 | ||
Hot water | CW | ¾" | ¾" | 1 ¼" | ||
K | mm | 850 | 1570 | 1470 | ||
Heating water flow | WED | 1" | 1" | 1" | ||
F | mm | 700 | 790 | 880 | ||
Heating water return | WYD | 1" | 1" | 1" | ||
B | mm | 330 | 330 | 420 | ||
Connector horseshoes | KP | 1" | 1" | 1" | ||
C | mm | 420 | 420 | 510 | ||
J | mm | 1180 | 1480 | 1290 | ||
Circulation | RC | ¾" | ¾" | |||
G | mm | 790 | 900 | 460 | ||
Muff temperature sensor closed | CT | 3/8" | 3/8" | 3/8" | ||
E | mm | 850 | 510 | 1200 | ||
I | mm | 1000 | 1140 | 1200 | ||
Muff temperature sensor closed - long | RK | 3/8" | 3/8" | 3/8" | ||
O | mm | 895 | 1030 | 1110 | ||
P | mm | 325 | 325 | 425 | ||
Muff heater | MG | 1 ½" | 1 ½" | 1 ½" | ||
M | mm | 895 | 1030 | 1110 | ||
Muff thermometer | RT | ½" | ½" | ½" | ||
N | mm | 1210 | 1510 | 1445 | ||
Drain | ZS | ¾" | ¾" | ¾" | ||
N | mm | 80 | 80 | 95 | ||
Cleaning hole | W | 2" | 2" | Ø130 | ||
L | mm | 310 | 310 | 400 | ||
Magnesium anode | Ø x L | 40 x 240 | 40 x 330 | 40 x 390 | ||
AN | 2" | 2" | 2" |